Jul 21, 2002 #1 S smallv6 Still in Block Learn Mode Joined Jul 20, 2002 Messages 527 Has anybody installed new doors on there cars, If so how difficult of a job is it? Thanks in advance
Jul 21, 2002 #2 Z zam70 ->ROGUE Joined Aug 6, 2001 Messages 2,731 It's not to bad. Make sure you have some help, the doors are pretty heavy. Make sure to put in new pins and bushings in the hinges. Toughest part is getting them ajusted. Just take your time. 11mm ratchet wrench makes the job ALOT easier.
It's not to bad. Make sure you have some help, the doors are pretty heavy. Make sure to put in new pins and bushings in the hinges. Toughest part is getting them ajusted. Just take your time. 11mm ratchet wrench makes the job ALOT easier.
Jul 21, 2002 #3 S smallv6 Still in Block Learn Mode Joined Jul 20, 2002 Messages 527 Thanks! I will give it a try, I have my 11mm ready to start!
Jul 21, 2002 #4 A Audiowizard CARE FOR A SMOKE ANYONE? Staff member Joined May 25, 2001 Messages 1,045 Use an engine hoist with nylon straps that way it holds it steady while you put it into position. I have done this a few times and this is the easiest way without banging the door into the fender.
Use an engine hoist with nylon straps that way it holds it steady while you put it into position. I have done this a few times and this is the easiest way without banging the door into the fender.