NEW Front timing cover- needs alum repair

[Squid4life]

Okay, a while back when I was getting ready for a cross country trip in the GN I decided to buy a new front cover and port it, etc. When I ported the pickup part of it i hit air. It was pretty thin walled and I was too aggressive I guess. I had a buddy try to weld it but he didn't have good luck with it and it had a few small pin hole leaks. If someone is good enough or wants to pay someone who is good enough, it'd be an easy repair. I ended up buying another because I didn't have time to find someone else to repair it, I just ate it and bought another.

You can see it is new, no miles. It is for 14 or 20 bolt, and has about 4 hours of port work done to oil passages, water passages, and flash removal. If you need more pics, let me know.

$40 shipped in the lower 48.

 

[Squid4life]

TTT. I just found this part again and was thinking someone out there may be a good fabricator and can use this. If not I will put it with the aluminum cans for recycle, or put it on the wall for "art".

$35 shipped US

 

[wyominggun]

scrap it