New K1 Technologies Buick 6" H-Beam Rods

[Ken Adams]

For sale: SOLD new K1 Technologies Buick 6" h-beam connecting rods,.BH6000ARLB6-A. Pin .927" Narrow width. Asking $460.00 shipped to lower 48 states,

 

[dank GN]

Any trades ? Don't need anything ?

 

[Ken Adams]

Any trades ? Don't need anything ?

The only thing I may consider would be trading for a new 4340 forged Scat or Eagle stock stroke crank. Do you have one?

 

[dank GN]

I have acouple bad ass cranks but they are worth a lot more then the cost of rods .

 

[1952ray]

I have acouple bad ass cranks but they are worth a lot more then the cost of rods .

Oh my, you got that right!!!

 

[11.20n1320]

What size pin?

 

[Ken Adams]

What size pin?

.927"

 

[11.20n1320]

narrow width?

 

[ShaunDonWe2]

So these are the stroker rods?


Sent from my iPhone using Tapatalk

 

[Ken Adams]

narrow width?

Yes

 

[earlbrown]

So these are the stroker rods?


Sent from my iPhone using Tapatalk

6.000" can work with either stock or stroker.

 

[Ken Adams]

I purchased these rods to use with a set of used custom pistons I already have. Was planning to use the custom pistons with the 6" rods and standard 3.400" stroke crank ,however plans have changed.
The used custom pistons may also be available. Pistons have pins and rings

 

[dank GN]

I purchased these rods to use with a set of used custom pistons I already have. Was planning to use the custom pistons with the 6" rods and standard 3.400" stroke crank ,however plans have changed.
The used custom pistons may also be available.

Size ,price? Specs

 

[Ken Adams]

Size ,price? Specs

Used forged J&E pistons, 3.9949" actual piston size, top ring 1/16, 2nd ring 1/16, oil ring 3/16, compression height 1.757", pin diameter .9271", wrist pin retainer type double spirolocks. I had planned to use these pistons and rods in a 4.1 block. Asking price $300+shipping, only to lower 48 states.

 

[Ken Adams]

ttt

 

[gunzandgearz]

ttt

Hey Ken, still have the rods and pistons

 

[Ken Adams]

Hey Ken, still have the rods and pistons

Yes I do. Any additional information needed?

 

[gunzandgearz]

Yes I do. Any additional information needed?

I might be interested,I just cant decide between the 4.1 or a 3.8 build as I have two spare blocks one of each.i will be pulling the trigger here pretty quickly and just saw you're as today, pistons in good shape?

 

[Ken Adams]

I might be interested,I just cant decide between the 4.1 or a 3.8 build as I have two spare blocks one of each.i will be pulling the trigger here pretty quickly and just saw you're as today, pistons in good shape?

Pistons are good condition, some minor skirt scuffing. Send me your e-mail address and I will send pics. Price $750.00 for both pistons and rods plus shipping cost to lower 48 states only.

 

[Ken Adams]

Weekend bump to the top