You can type here any text you want

New oil cooler,hook up

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Slowhawk

New Member
Joined
May 3, 2003
Messages
160
I've been reading many threads here and haven't found the answer I need.
Looking to install a F-body radiator.So was thinking of putting in a dual cooler for the tranny and oil with a seperate fan.(keep away from radiator since I have a front mount cooler)

Is there any kit's out there that will make this switch easier?
 
are you talking about having a oil cooler and a tranny cooler in one? or are you just talking about having two but asking where to locate them?

i have the F-body radiator, and i run the tranny cooler that is buiilt into it, but i got an aftermarket oil cooler. i have it located behind the bumper on the passenger side. i made a bracket so the oil cooler sits on a 40º angle (suppsodely that way it opperates the most efficently).

if you follow the link to the picture of my car in my sig, i have pictures in that album of my oil cooler bracket, i made it so it would bolt into existing holes.

good luck
 
I will be running a seperate cooler for the oil but I've seen some coolers that do both oil and tranny (2 ins/2 out's).Figured the tranny could use more than just the radiator hookup.
 
I don't know of any 'kits'. I had a dual PermaCool cooler and put it in front of the pass. air dam. It has its own fan and takes some heat out of the radiator. It is a little ticky, but not really hard to do. I did everything myself (except hook up the fan) and I'm as skilled as a 4 year old. Email me if you want detailed instructions.
 
Back
Top