After years of looking I broke down Saturday and bought my first 86 GN. Car has 47,000 miles. Car is not running. Car is in nice shape. Only place I found rust was on the doors. But for what I paid I can't complain. So here's what I got. A complete car with the engine taken out and disassembled. So I have boxes of parts. Engine was rebuilt in 02. Spun a crank bearing, engine taken apart, owner lost interest and needed money.
These are the parts I have- ARP studded, O ring block, JB forged pist, 70mm TB, Ported intake, GN1 champion alm heads, 55 injectors, 1.6 roller rockers, lt1 mass air, poston headers, A/R .60 turbo, precision intercooler, 3500 stall, kenne bell ram air dam, under drive pullies, poston down pipe and exhaust, 3.73 rear end, 340 fuel pump.
Now I want to take these parts and make a nice street machine. So I looking for info on what cam to get, chip. Will these parts work together? Just looking for help on what direction to go to have a good running car because I know there are alot of guys on this board that know their stuff. Thanks for the help, Frank
These are the parts I have- ARP studded, O ring block, JB forged pist, 70mm TB, Ported intake, GN1 champion alm heads, 55 injectors, 1.6 roller rockers, lt1 mass air, poston headers, A/R .60 turbo, precision intercooler, 3500 stall, kenne bell ram air dam, under drive pullies, poston down pipe and exhaust, 3.73 rear end, 340 fuel pump.
Now I want to take these parts and make a nice street machine. So I looking for info on what cam to get, chip. Will these parts work together? Just looking for help on what direction to go to have a good running car because I know there are alot of guys on this board that know their stuff. Thanks for the help, Frank