NEW Race Ported Heads Big valves!!!

[frankg]

FRESH 0 miles Race ported and polished 8445 heads--
--NEW Manley Stainless Severe Duty 1.77"int 1.50"exh valves
--Fully Ported and Polished
--Gasket matched to Felpro 1200 and 1400 gaskets
--NEW Bronze valves guides
--5 Angle Competition valve job
--NEW PC oil seals on Intake and Exhaust
--Combustion Chambers polished
--NEW spring retainers
--NEW springs setup @ 100psi seat for Hydraulic flat tappet cam

$850 with no exchange I accept Paypal!!

 

[WHEEZER]

Nice looking port work Frank. Is the cc variance between the chambers really close to each other? Thanks guy.

 

[frankg]

WHEEZER yes they were all matched in cc volume between all chambers when they were smoothed to keep the compression ratio equal between cylinders. I do this to all my heads when the combustion chambers are done. Frank

 

[WHEEZER]

Thanks Frank. Still waiting on a reply from another board member on a 500 mile set of Champions. He must have went on vacation or something. Paul.

 

[frankg]

OK but these heads flow better than Champion Irons and have 0 miles. I've flowed Champions they flow @ 205 cfm mine flow over 210 cfm Frank

 

[Scott Atk]

Hi Frank ! It's me again. I've enquired before about your heads.
How much additional would it be for beehive springs setup for a 210 - 210 hyd. roller? Also, they are cut for roller rockers right??
Thanks, Scott

 

[frankg]

Scott Let me check how much it will cost to get the parts and i'll get back soon!! Yeah i will clearance them for rollers. Frank

 

[shawnz]

Frank will those heads work with the stock cam

 

[TYRFRYR]

You match your cam to the what the heads flow and how/where they flow.

Frankg - I'm interested. Please let me know where I sit in the line up.

Tyson

 

[frankg]

Yes the heads will work with a stock cam. TYRFRYR 1st person to show me the $$ gets them. You can Paypal me or Send a Money Order. Give me your Address if they need shipped and i'll get a quote to ship them for a total. I can have another set done for Scott in about a week to fit his needs if he wants a set.. Thanks,Frank garbaczs@hotmail.com

 

[turbotwister]

FRANKG,
Good to see someone making good use of the VPE RACING heads.Tell tony nick said hi next time you talk to him.

Nick,