You can type here any text you want

New Wheel Spec

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Knux65

Member
Joined
Apr 25, 2011
Messages
100
Ok, guys. I've been eyeballing this set for a couple of months but this Black Friday sale may force my hand. Unfortunately this isn't the typical brand you'd see on a G-body, so there's no go-to spec and I'm next to clueless about wheels.

http://fifteen52.com/collections/cast-wheels/products/16x8-formula-tr

So, I'm looking at 16x8 all around and I've researched that the 5x120 pattern is compatible. My question is; what backspacing and offset would give these wheels a nice flush look? Any input would be great. Even options on the wheels themselves...

Thanks!


Sent from my iPhone using Tapatalk
 
Better off going with a precise fit 120.65 sometimes shown as 120.7 rather than running into a fittiment problem. What id the lugs are off and u gotta drill. I think it also depends on the make of the 5x120 wheel as i have seen 5x120 slip over fine. Cant remember about how the lugs were. Buy at own risk.
 
I understand the pattern isn't precise, but from I've seen its a fairly common swap (S-10 guys running BMW wheels). If anything just adding hub centric rings for peace of mind. Thanks for the insight, however.


Sent from my iPhone using Tapatalk
 
I have run 5x120 wheels before with zero issues. Fifteen52 is a legit company. Quality should be good.


Sent from my iPhone using Tapatalk
 
Update:
Contacted Fifteen52 to get some info. They are able to custom drill a 120.65 pattern on a blank set and recommended an et0 offset. The rep was very responsive via email, fwiw.


Sent from my iPhone using Tapatalk
 
Back
Top