NIB Elgin Camshaft P/N E-914-P

[shumpertdavid]

New in Box Elgin Hydraulic Flat Tappet Cam

Bought for my engine build and ended up going custom ground roller instead. I've had this sitting in a storage locker in my house for several years.

P/N E-914-P Buick V-6 Even Fire W\Integral Distributor Drive Lift at valve .496 In\Ex, Duration at .050" 224 degrees, adv Duration 290 degrees, Lobe Separation 112

$60 Shipped

 

[84beastregal]

Got pics?

 

[shumpertdavid]

 

[84beastregal]

How big is it compared to the edelbrock cam

 

[shumpertdavid]

The edelbrock is a split lift and split duration. The exhaust side has more life and hold the valve open a little longer than the intake side. The Elgin has even lift and duration on intake and exhaust. I would say the Elgin is a step above the Edelbrock, it has just under .5" lift with a fair amount more duration on the intake side compared to the Edelbrock.

I'm not an engine builder and bought this cam solely based on having more lift and duration than the Comp Cams 268H that is in my current motor. I ended up having a custom grind roller done based on my specs and use for my new build.

 

[rwcarnut]

Is this still available?
Sent from my RM-845_nam_vzw_100 using Tapatalk

 

[shumpertdavid]

Yes sir it is

 

[shumpertdavid]

Bump

 

[shumpertdavid]

Bump