NOS Kenne Bell Valve Covers

[TABuickMike]

I have a few NOS Kenne Bell Valve cover sets for both V6 and V8 engines. Most are complete sets but there's a few V6 sets that are only left hand sides (no fill/drain holes are drilled, just solid). Also, I don't know exactly how many complete sets of V6 valve covers there are because some are broken up, we have more of one side than another, and some of them are 198/225 only. Once I get the hard numbers in a day or two here is what I have:

• Polished and Krinkle black for 198/225 and 231 V6 engines (we want these GONE) ... $100

• 1 Krinkle black and 1 Red for 350 Buick engines (Brand new) ... $150

• 1 Polished for 350 Buick engines ... $300

• 1 blem Red set for a 400-430-455 (we tried highlighting them on our CNC, the guy had a setting wrong and it was too low so the edge of one of them is cut low. If you stuck it on the passenger side you'd barely notice) ... $125

 

[TABuickMike]

and

 

[gold69charger]

Pm sent!

 

[gn4u2c]

i will take the ones in pic 2 thanks

 

[TABuickMike]

Ok got you too guys, let me get them boxed up with a total and I'll let ya know later today!

The black and polished 350 covers are sold along with the 455

 

[KL Mallender]

Good sturdy V6 valve covers, but watch for tight fit or rubbing on right side rear against firewall shield.


Kevin.

 

[TABuickMike]

Ok I went and counted everything, I dont have any more Polished covers for 231 engines, but I have 3 complete krinkle black sets and 1 set that doesnt have a breather/fill hole drilled in it.

Theres a polished set for a 198/225 which requires elongating the bottom bolt hole locations to fit on a 231.

 

[Joe 1320]

Any chance you have a set of the neat allen head valve cover bolts that go with these covers laying around?