NOS or MINT Factory Rear Upper Control Arms and other parts

[88hurstolds]

Just as the title says, looking for NOS or MINT FACTORY GM G-body rear upper control arms for a restoration.
Also looking for front control arms (upper RH, lower LH), crossmember or anything else under the car that you took off of a low mile car.

 

[88hurstolds]

ttt

 

[49-blues]

I have a setof stock rear springs, a set of cargo rear springs, I will have two sets of front springs soon along with front control arms, rear stock swaybar, I think I have sets of stock lower control arms along with a pretty good set of rear southside lower controlarms. Also tothe list I have a 87 transmission cross
member bar from a 87 442.Also several exhaust parts.

 

[3.8L V-8 eater]

Got a set of lower control arms and stock rear sway bar... Little surface rust but not compromised in any way. Sand blast and paint. I'll let em go for cheap although shipping on the sway bar would be a killer!!

 

[88hurstolds]

I'll let em go for cheap although shipping on the sway bar would be a killer!!

Just shipped a rear sway bar via USPS along with a Grand Prix frame brace, it was $14. Don't always assume shipping is expensive... I've bought and shipped over 1,638 items in the past 7 years.
I don't need the sway bar, I have a few sets of NOS lower control arms.
I am ONLY looking for MINT low mile parts, if it has any rust I don't need it.

 

[88hurstolds]

I have a setof stock rear springs, a set of cargo rear springs, I will have two sets of front springs soon along with front control arms, rear stock swaybar, I think I have sets of stock lower control arms along with a pretty good set of rear southside lower controlarms. Also tothe list I have a 87 transmission cross
member bar from a 87 442.Also several exhaust parts.

What are the spring codes? Do they still have the factory tags on them?
Interested in the 87 442 crossmember, no rust with original factory surfaces (never been bead blasted???) More info on the exhaust, is it factory VIN 9 442 exhaust? Tail pipe brackets or original CAT and bracket?

 

[88hurstolds]

ttt