Oil cooler adapter install=No oil press

[gnx139]

I installed the oil cooler adapter and lines back on the motor. Now I'm getting no oil pressure on start up. Lots of clanking. Shut her off. What to do??

 

[pdzz]

Pull off the upper oil cooler line and fill it with oil. I've done this several times with success. Phil

 

[gnx139]

I'll try that tomorrow. It is a new radiator with "0" oil in the internal cooler. I don't want to ruin the motor cranking it dry. How long is OK before damage occurs.

 

[cabech984]

pull the ecm fuse and let it crank up to build pressure