oil pressure plug

[87lightweight]

i need a plug for the factory oil pressure switch, mine is like melted

 

[Quick6'n'-K.C.]

If your looking to remove the oil pressure switch / idiot light switch on the brass block.... Just remove it and run down to napa. Should be standard pipe thread, use some teflon tape since it still might be wet and you will be good to go.

I was going to tell you to remove the switch, the block and get a steel braided hose made from the block to the turbo.... I have a hyd shop here in town that i deal with, they sell all the fittings you would drool over in the summit catalog
BW

 

[87lightweight]

thanks but i was actually looking for the plastic plug with wires that goes onto the sending unit

 

[Quick6'n'-K.C.]

Same as the headlight socket

BW

 

[87lightweight]

thanks learn something new everyday :wink: