Opinion's needed

[gndriver]

I just got a set of delphi 55lbs injector's for my combination below. I need to know about everybody's opinion about running these injector with my combination. I will upgrade to a 63 or 45 once i get the headwork and the bosch staged fuel pump but that wont be for a while. Should I trade these in for 50 lbs instead or just install the 55 once I get all the work done to the car and not now.

 

[rob nolan]

I would stay with the 55s. But you know you will have to get the ECM modded for low impedance injectors for the 55s.

 

[bruce]

Properly chip'd you'll be fine.
I'd get Ramchargers to put the right injector drivers in.
Get a second ecm, and use it for a while, then send one out to get the drivers put in it.

Long term I'd suggest you get the right drivers but for a while the stock ones should be OK.

 

[gndriver]

Yes I talked to bob bailey he say he can do it for a good price, but let me get this straight bruce (I'm not to bright) I can run the stock ecm with those injector's for a short wile before my ecm dies? And wouldn't those injectors hurt the spool up of the te44 i got in there now because of the amount of fuel they supply?

 

[gndriver]

ttt