Parts @ BG & available now

[Michael McCoy]

I'm gonna bring as much stuff as the 44' trailer can hold & most all of it will be cheaper than I've ever sold it for. Bring your wallet & save big 'cause I don't want anything to come back to N.C. with me. Some of the items include:
HOT AIR parts:
-newly bored .30 over 14 bolt block-$100
-intakes/MAF's/& ps. welded headers-$50 ea.
-throttle bodies/accessory brackets/fuel rails/alternators/hard water lines/& gutted cat. convertors-$30 ea.
-water pump/crank pulleys/EGR flex tubes/& injector harnesses-$10 ea.
MISC. parts:
-B pillar trim/ashtrays/armrests/oil slingers/turn signal harnesses (2 in the set)/timing pointers/under hood or trunk weatherstrips/ds. kick panels/package tray trim (2 pieces)/hood release cables/radiator X bars/window lock switches or bezels-$5 ea.
-ECM holders (3 piece set)/air vents (set of 3)/'87 lower radiator fan bracket/upper or lower opera window trim panels/hood struts(2 in a set)/fabric panels below opera windows/taillight harnesses/2 DOT connecting rods/headliner trim pieces/& hood release cables-$10 ea.
-3rd brake lights/cruise cables/female seat belt pieces (mount between console & seat)/front or rear bumper mounting struts (2 in a set)/cruise control modules/& front or rear chrome bumper guards or bumper guard rubber impact strips (2 strips in a set)-$15 ea.
-grey 3rd brake light assembly w/TTYPE overlay already installed-$20
-(2) stock passenger ttop plates (underneath the ttop) that are not rusty-$40 ea.
-(2) 8" K&N air filters-$30 ea. (will be cleaned & reoiled before they ship out)
-NEW 2 piece chrome K&N air filter cover kit (each piece attaches to the end of the filter-$10
-'84/'85 TType rims-$30 ea.
-rear seat pairs (upper & lower)-$75 & lower
-(4) BQ trannys-$250 ea.
-non CSII lower door panels in various colors-$60/pr. & up.
More stuff will follow in hopes of selling anything & everything possible before & while we're in BG next week. Thanks.

 

[S2V6RACER]

I am pulling the car over to your booth and we need to play "complete the missing trim piece game". I am bringing down the convertor Mike.

Ted

 

[Danster]

Do you have a pic of this

NEW 2 piece chrome K&N air filter cover kit (each piece attaches to the end of the filter-$10

Send to oviedo@nortel.com

Thanks!

Dannyo

 

[Michael McCoy]

I'll send over a pic for you shortly Dannyo.

Bring it on over Ted & we'll piece that puppy together

MORE STUFF: ds. inner fenders-$50 ea & down, outer fenders-none over $70 ea, metal fender liners-$15 ea, wheelwell trim-$40 ea & down, chrome bumpers-$40 ea, aluminum bumper supports-$60 ea, stock Y pipes-$40 ea, driveshafts-$50 ea, hot air front covers-$15 ea, consoles-$60 ea & down, shifter plates-$25 ea, 8445 heads-$70 pr, charcoal canisters-$10 ea, jacks-$25 ea, pull strap pairs-$40 & down, hoods-$350 ea & down, square dash surrounds-$25 ea & down, dashes (no wiring/vents/plaque/speedo/or climate controls)-$75 ea & down, hood & trunk lip trim (chrome or black)-$40 & down, windshield & rr. window trim (both colors)-none over $30 ea, quarter windows-$80 pr & down, steering boxes-$50 ea, gas tanks-$100 ea & down, & 14" Buick Rallys-$20 ea.
There's more where all this came from. We've got quite a bit of lawn work this week (if the rain holds out) before I leave for BG, so another list of parts might take a while. Thanks.

 

[1320n10]

Mike i need wiper arms for both sides in chrome or non painted what ever they are. Is that something you can have there for me on wed or thur.

 

[Michael McCoy]

Yep Walt I'll have some there for you. Thanks.

 

[y-hate]

what about a headliner board for a moon roof??

 

[Michael McCoy]

y-hate I do have 1, but it might not make the trip as thin & flimsy as it is. I'll see what I can do. Thanks.

 

[xippman]

whta about a 109 block and crank ? or the hole motor ?

 

[hotrodgary]

parts wanted

Mike,
I'll be at B.G. late wednesday;track Thursday. Looking for ( 1 ) shiny exterior B pillar trim; as close to "new" as possible and ( 2 ) aluminum rear bumper reinforcement and ( 3 ) export bumper brackets, and ( 4 ) Cyberdyne dash. Since I saw your ad first, I'll await a reply before emailing BWEAVY. Please reply to this at lovellgl@aol.com.
Thanks. Gary L.

 

[Michael McCoy]

xippman I'm out of the motor and parts you're looking for. Sorry about that, but thanks for asking.

Gary I do have plenty of the aluminum rr. bumper supports, a bright new shiny pair of NOS front export bumper brackets, plenty of the chrome trim (you're more than welcome to dig thru everything & see if anything meets your needs), but no Cyberdyne dashes at this time. Just look for the Muscle Car Salvage banner & bunch of used parts or ask most anybody there & they should be able to direct you to us. Thanks guys.

 

[hotrodgary]

parts @ B.G.

Thanks, Mike !! Look forward to seeing you there. Gary L.

 

[Phatman]

Mike,

Do you have any nice upper door panels for a GN?

 

[BandAid]

Looking for a properly repaired DS header with high temp coating on it ,,,,I have a reapirable DS and good PS and crossover for partial payment and cash,,thanks Dennis

 

[Michael McCoy]

Thank you as well Gary.

Mike I haven't had a nice pair of GN uppers in forever! Sorry about that, but thanks for asking.

NO ds. headers like that here right now Dennis. Thanks for inquiring though.