parts f/s -pics

[87buickracer]

1) sx fuel pump (p/n)1824270100-1 -$175.00 shipped
bought off board member,but went with double pumper
was tested and works fine
2)steel braided turbo oil return line(only,no fitting to turbo) $60.00 shipped
(like new condition)good to have spare or if building another motor
3)apexi turbo timmer(brand new in box) $99.00 shipped
only open box to look at
4)40 over hyper pistons (7k miles) $150.00 shipped..
5) 2004r stock sun gear shell (perfect condition) $25.00 plus shipping

accept payments by postal m/o only at this time..
paypal acct down for couple of weeks..

 

[87buickracer]

6)blue quarter panel interior pieces (passenger side) $50.00 plus shipping
good condition
7)blue quarter panel interior pieces (driver side) $50.00 plus shipping
good condition
8)steel braided turbo return $50.00 shipped
one off my motor
9) jvc detachable face 180watt radio (model#kd-S590) $50.00 shipped
radio was stolen..
10) 2004r valve bodies cast # d-8(jj5) and d-9(cj7) $25.00 each plus shipping
cast numbers d-9 thru d-12 works well with transgo reprogramming kits

ps-other blue interior parts include head liner,a/b pillar trim,door panels,all trim pieces..
-also have many other parts to post at a later date..thanks...

 

[87buickracer]

more parts

11)ported/polished heads-
heads have 3 angle valve job,big 1.77 intake valves-1.5 exhaust valves
valve guides machine .500 on intake and exhaust for high
performance valve guide seals..heads are casting#6293
intake side is ported to felpro 1200 intake gasket and we used
sce copper exhaust gasket these heads are heavily ported
and polished..one of the intake runner walls was repaired professional
and never a problem since.look at the first picture in the middle where pushrod hole is and you can see repair.on the exhaust side of one of the runners is a little thin on exhaust port,so copper gasket was used for proper
seal.these heads were originally set with behive springs for my roller
cam,but are in machine shop being set up with for 500 lift
flat tappet cam and 85 lbs on the seat for cam break in..
I have alot of money tied up in the heads and they work fine and
do not over heat..with my dual fans and factory radiator
my temp in traffic was 160-170 degrees with front mount and
no air dams.. price is $600.00 shipped to your door..

 

[87buickracer]

12)odometer/radio cover $40.00 shipped

13)stock cam $35.00 shipped

14)chrome b+m pan for 400 tranny $30.00 shipped

15)stock intercooler fan $35.00 shipped

16)msd 10mm race wires (magnecore) $45.00 shipped

 

[87buickracer]

17)Heavy duty wastegate actuator for 70 series turbo $65.00 shipped
like new condition,bought off board member...
can take picture-still on car

note-sx fuel pump is rated at 1000 hp efi and 700 hp forced induction
and puts out 80 gph at 45 psi and 12 vdc

 

[gnpoweredrail]

1st in line for wastegate actuator.
pics please
PM sent

 

[87buickracer]

pics

1st in line for wastegate actuator.
pics please
PM sent

pictures of heavy duty wastegate actuator on my 72 turbo..