I have a fresh set of ported iron heads setup for a roller cam that I just picked up from Champion racing today 4/30. I had Champion do a valve job, setup the heads and fill the heat risers with aluminum. Just to be clear, I did the port work on the heads. I spend many hours on these heads and they look excellent. These heads have been clearance for roller rockers. The valves in the heads are new SI stainless and the springs are new PAC nitrided 1518 beehives. The spring are setup to have around 160 lbs at the seats valves closed. I also have a set of Harland Sharp 1.55 roller rockers that are in good condition with all hardware included and a set of RJC valve cover spacers. These are a must if you want to use stock valve covers with Roller rockers. Finally, I have a set of 12 point ARP studs that are used but, are in good condition. I would like to sell this setup as a package. I would like $1650 for the whole setup...take off a $100 if you supply your own springs, retainers, and locks.
Ported 8445 headed fresh..HS roller rockers package
- Thread starter Cme2fly
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
Bigjack7440
Member
- Joined
- Jul 18, 2009
- Messages
- 290
I would love to have these heads , God they look great. The CNC can't get that realy slick finish like that. I had a Gene Fulton 707 that had a set of Big Duke Big Chf. And they were $7000 and still not that smooth . Man still has to do it right. Good luck with the sale. Bump for a bad ass set of heads
Thanks Jack..hours upon hours of sanding my friend..:wink:
Bigjack7440
Member
- Joined
- Jul 18, 2009
- Messages
- 290
I know you said that you would like to sell all together BUT, would you sell heads (no springs) if so pm your $ . I saw Champions $ on there web site for there ported heads , not bad.
PM sent.
Check your PM's.
Sale pending to Chris..
Sold.
Similar threads
