You can type here any text you want

ported Duttwieler ic neck

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
I did when I installed mine. I ported both sides, I guess you could call it porting. Really I just cleaned it up and belled the opening, I couldn't tell you if if really helps, bit I figured I would do it while I have everything out and apart. I did take a good bit of material out because the casting is pretty rough. I would think that opening it up that much and cleaning everything up would help something.
 
Ok fellas, I ported the hell out of my Duttweiler neck today. Cut a tremendous amount of metal out of the thing. I port matched it to the size of the throttle body. I also did the same to the outlet side of the intercooler as well. Also made a new uppipe from a true 2.5" mandrel bent elbow. Unreal how much difference it made. It moves so much more air that I am going to have to add some fuel with the chip as it is slightly lean. It will spin the tires now at 30-35 mph at only 17 psi. I can't wait to get some slicks on this car and see what it can do at the drag strip.
 
Back
Top