powdercoated package deal

[TURBOELKY]

Here are a bunch of parts I've been sitting on while my engine has been in the machine shop. Well, I've lost interest in getting back into the Buick thing, and I really need a new truck. So, up for sale is a bunch of stuff I dont plan on using any more. Prefer a local sale, but willing to ship.
looking to sell as a package...
no trades,
no checks,
no low balling,
and no Nigerian check fraud....
Accufab 70mm TB w/ vacuum block
precision polished plenum
gn1 valve covers w/stainless allen bolts
heater lines with hoses and valve
new water pump and original pulley w/stainless bolts
rjc power plate
alternator Y bracket
coil pack U bracket
fuel rail with AN fitting
throttle bracket
All that has to go as a package. Everything that is black has been professionally powdercoated 90% gloss black. Water pump was mounted so has a little discoloration on the aluminum inside, but was never used.
For this package I would like to get:
$1200 obo plus shipping

For sale separate:
Brand new Comp 885 roller lifters $225
Turbonetics T-66 non ball bearing. Needs rebuild>$300 obo
Caspers fuel injector harness, near new. $50 obo
$1600 picked up 1675 shipped for everything, gaskets in pics too!! You will have the purdiest engine around!!!!

 

[Bigjack7440]

If you break up parts I would like to get a price on TB& Dog house and if the RJC plate matches the dog house I'll take it also. If not good luck with the sale

 

[TURBOELKY]

pm sent. I will separate parts if interests are there for individual parts, I can make a price list per each part.Thanks!

 

[Nasty Wendy]

Brand new Comp 885 roller lifters $225

Put me down for these. Paypal?

 

[cruzn57]

sorry to hear that Jeremy

I let my stuff sit for a while ,
' then I get interested again later.

stay in touch ok?

 

[TURBOELKY]

I let my stuff sit for a while ,
' then I get interested again later.

stay in touch ok?

I hear you Lee, but this stuff has been sitting a little too long, and life's priorities and needs have changed. I'm done.:smile: See you around.

 

[87 national]

how much for valve covers?

 

[TurboTJT]

I'll take:
+) Caspers Fuel Injector Harness

Interested if willing to sell separate:
+) Accufab 70mm TB w/ vacuum block
+) Precision Polished Plenum
+) RJC Power Plate

 

[87-TURBO-T]

How much for the lower intake?

 

[TURBOELKY]

oh yeah. razors progressive alky kit for sale. 400 miles on it max.
includes 3 bar map...400 bucks
polished 3" maf, ls1 maf, trans + and k&n filter 200 for all!
pics tonight.
not sure on price of lower intake separate, comes included with the 1200 deal0
forgot it also includes powdercoated main accessory bracket too!
im not desperate to sell guys, im not giving this stuff up for pocket change, but fair prices.

 

[TURBOELKY]

pics.
Also, 3" down pipe for external gate...$250

 

[TURBOELKY]

HKS 42mm gate. Not the best looking set up, but works EXCELLENT !! $100 for the header including the gate and adjustable knob...could use a bead blasting, not rusted bad, just surface...

 

[TURBOELKY]

sale pending on
Turbo
upper plenum, rjc plate, and TB to a local. Will keep posted.
Since there is interest in pretty much everything, parts will be sold separate upon request.

Sale pending on harness to turbo tjt
Sale pending on lifters to Nastywendy.

 

[TURBOELKY]

With the interests, here are the prices if sold separate. Thanks>

All parts have been professionally powdercoated, no bootleg in your home oven baking! Pictures do not do justice, but these parts are absolutely beautiful. Here we go.
Stock lower manifold includes billet thermostat housing, egr block off, and all sensors. Will include gaskets! $285

Champion Valve covers w/ stainless bolts $200
fuel rail w/AN fitting $85
belt tensioner $100
alternator Y bracket $35
heater lines with accessories $85
New water pump with stock pulley and stainless bolts $50
vacuum lines from vacuum block $45
main accessory bracket $100
throttle bracket $45
Package price for everything $845
plus shipping. Thats knocking 185 off the price. You really dont want just a few of these pieces, the rest of your engine will look TERRIBLE, trust me
Also:
GN1 performance 3" maf pipe, polished, LS1 MAF, and translator plus, couplers and k&n filter $200

3" stainless down pipe for external gate by GN1 Per. $250
HKS 42mm gate mounted to stock header, could use a
cleaning, includes adjustment knob $100
will do header with gate and down pipe as a package $325
The gate works flawlessly.
Pay Pal available, local sale preferred, will ship. Prices DO NOT include shipping. The more you buy, the cheaper it gets!

 

[Rigo's 87 GN]

put me next on the hardnes if sale falls!

 

[TURBOELKY]

put me next on the hardnes if sale falls!

Harness sold. Thanks.

 

[Pittsburghkid]

1 package deal broken up deserves another I'm interested in the MAF translator. let me know if your willing to separate that and how much. Thanks

 

[GN owner]

Pm

You have PM on the alky kit. I see that it is Razor's progressive kit so I'll take it. How do you want payment sent?

 

[that national]

polished 3" maf, ls1 maf, trans + and k&n filter 200 for all

ill take this if you dont want to seperate the translator.

 

[TURBOELKY]

You have PM on the alky kit. I see that it is Razor's progressive kit so I'll take it. How do you want payment sent?

You got it. I will send a pm with payment info, not sure on price for shipping to Hawaii though. I will find out.

polished 3" maf, ls1 maf, trans + and k&n filter 200 for all

ill take this if you dont want to seperate the translator.

PM sent with total shipped, thanks!