power window wire connections

[turbobooster]

ive been looking for the wire connections at the end up the wires that come up from the window motor up to the 2 button window switch on the passenger side the switch works fine the problem is the wires are only hanging on by one or two small wire threads now and it doesnt allow it to get enough juice to roll the window up and im tired up having to have it hanging out of the window side panel to make the full connection with two hands and i cant cut and reuse them because they are tightly crimped from the factory i assume so my questions is do they sell these wire connections that go around the small 6 post behind the switch? i can put a pic up if i didnt really give the mental picture of wat im talking about thanx

 

[turbobooster]

MISTAKE its the drivers side not the passenger side sorry

 

[turbonut85]

Best thing to do in your situation is to get another connector from a donor car that still has the wires on it. then splice them into your wires that come from your harness....if that makes sense. I assume this is the connector you are referring to.

 

[turbobooster]

yea thats the piece i might just have to do that again thanx