Precision 6262 cea turbo

[20psiofevil]

*SOLD*

 

[reddog3.8]

Pics please and very interested


Posted from the TurboBuick.Com mobile app

 

[20psiofevil]

Here are a couple I took a few months ago. Will get more recent when I go out to my garage.

 

[20psiofevil]

$650 Shipped! Paypal add 3% or money order. I can have it shipped Saturday morning. Best way to contact me is through my email in the 1st post.

 

[GN Junkie]

Next in line sent you an email


Sent from my iPhone using Tapatalk

 

[TurboBuick86]

Why did u remove the exh housing for?


Posted from the TurboBuick.Com mobile app

 

[turbojoe1]

Why did u remove the exh housing for?


Posted from the TurboBuick.Com mobile app

He probably removed it, in order to paint it with high temp.


Sent from my iPhone using Tapatalk

 

[TurboBuick86]

Lol Okay


Posted from the TurboBuick.Com mobile app

 

[20psiofevil]

Why did u remove the exh housing for?


Posted from the TurboBuick.Com mobile app

Removed the ex housing to fab my current hotside. For me it was easier to use just the turbine housing because I could use vice grip clamps to hold it on the flange. While it was off I cleaned the compressor housing. This turbo is in excellent condition. If anyone requests I can get video of it in action, would be my pleasure

 

[20psiofevil]

This is how it sits now. Still on my car. I posted a video of the car running the other week at the track as well. The car has went a best of 7.00 @ 101mph (3500lbs race weight) on pump gas letting off the throttle fully 30' out. I used an edge lock up converter (gm 245mm core) that stalls to 2800rpm or so but the car will not hook with the current drag radials on a 2200rpm launch. I know I'm not pushing this turbo hard on pump gas and it has more power in it than the 16psi and 16* of timing im feeding this motor. This turbo is not a good match for my motor and is the reason I am selling.

Thanks for all inquires!

 

[TurboBuick86]

P/M u


Posted from the TurboBuick.Com mobile app