Precision FMIC install question

[88ZNX]

Installing a Precision FMIC and need to know where it mounts. Is it through the radiator support rods? seems to line up with them. Do I need to drill them out to make them larger for the intercooler hardware to work? Or does it mount different.

Thanks
Jason

 

[Bad Boyz]

What happened to the directions?No drilling to be done.If my memory is on I think you remove the cross braces.Should be four bolts w/nuts holding the braces.Now you have 4 empty holes.Thats where you screw in the 4 threaded rods.Then I think a nut goes on,cooler,lock washer and then nut.Hope this helps Its been awhile Plus getting old doesnt help w/memory

 

[88ZNX]

I bought it used. But I Got er done!

 

[Red C5]

Nice ride.

 

[88ZNX]

Thanks man! I want your 10.60 passes!

 

[ChevMCarlo84]

Nice. I gotta get me one.

 

[Smokin-6]

That looks sweet!!!

 

[88ZNX]

It was a pretty straight forward install, even without directions. It lines up with the radiator support rods, There was enough room to keep them and my external tranny cooler. I had the pipes powder coated I had to order the 5" sillycone hose for the top, should be in in the next day or so. Now I just need a big ol honkin turbo to feed the intercooler!

 

[TurboDetroit]

It was a pretty straight forward install, even without directions. It lines up with the radiator support rods, There was enough room to keep them and my external tranny cooler. I had the pipes powder coated I had to order the 5" sillycone hose for the top, should be in in the next day or so. Now I just need a big ol honkin turbo to feed the intercooler!

Bringing this back! What color powder coat is on those pipes, looks awesome...