Proportioning valve reset

[BigTady]

Gents,

Would love some wisdom here on this proportioning valve. I did the swap over to hydroboost and in the process I did not clamp off the proportioning valve. How can I reset this valve and move forward with proper bleeding? I've done a search and not much came up.

Tad
87GN
Sent from Xoom

 

[HouTX87]

I zip tied a wooden stir stick to the side of the prop valve and wrapped the zip ties around the brake lines lol. Hey it worked. The button is already down so don't try to push it down. The idea is to keep it from pushing out. Good instructions here. Scroll down to the "Bleeding Procedure" at the bottom.

http://www.gnttype.org/techarea/brakes/linelock.html

 

[BigTady]

I think I get it now.

Sent from my HTC Sensation

 

[mybuick]

bleed the brakes rr lr rf lf that will reset the prop valve.