PS I/C piping

[turbo buicks]

would it be possible to have the PS intercooler piping come out of the turbo, go under the front frame rail, into modified end tanks that face downwards, and go into the TB kinda the same way(under frame rails)? i measured the scoop on my stock I/C and it is well over 3 inches high and the scoop sits even with those things that hang down so i think i wouldnt have any ground clearance issues if i routed 3 inch piping under the frame rails. any opinions/suggestions?

thanks

 

[Buick Beginner]

Can't Remember

Man, someone on the board did that with the modified tanks, but I can't remember who. Maybe they will see your post. - BB

 

[turbo buicks]

i was digging through some old posts and Chris Taylor was talking about modding the endtanks i believe. maybe he will chime in.

 

[Chris Taylor]

I made new tanks and took out three rows. Installed aluminum 90* mandrel bends at the bottom of the intercooler like the V2. The tanks were narrow but worked well with in inlet and outlet at the bottom of the intercooler. This project took allot of time!