PTE super stock location intercooler

[jsta6]

I am selling my PTE super stock location intercooler and I am going to a thunder fab unit so that I can have more ground clearance.

Used for one year.

Price is $650 plus shipping from 33021. It has the 3" inlet and outlet. 17" long, 13" wide, 3" deep. Bar and plate. Good for 750 HP. A guy down here in Florida has run 9's with it.

The aluminum shroud has been cut to make room for my sway bar. I also got a little too close to a parking stump and the intercooler got pushed in to the intercooler fan, cuasing some scratches, but this can be painted over. The 3" up pipe has a hole drilled for alchy. Car is at the shop, so it may be a while before I can get pics.

 

[JC Turbo]

I have a friend that may be interested in it. Can you forward pics of the i/c and the damage.


Thanks

 

[jsta6]

I have a friend that may be interested in it. Can you forward pics of the i/c and the damage.


Thanks

Yes, I will try to get some ASAP.

 

[JC Turbo]

No rush, maining concerned about the damaged area.

 

[jsta6]

I am finally ready to sell this thing. Been busy with family issues. But I need money now, so am motivated.

Sorry, wife lost the digital camera, so I have no pics.

There are some scratches where the intercooler fan hit it, but the functionallity is intact. You can't see the scratches unless you stick your head in the engine bay. The bar and plates are fine. There are a some fins that are pushed together, but you can bend them back if you really wanted to.

There is also some paint missing from the front of the bottom of the intercooler from it getting blasted with air / dirt, etc on the highway and from driving around. But you can't see it when it is installed.

The only visible stuff are some small scratches on the top of the intercooler, on the input and output pipes.

All scratches are nothing a real quick touch up paint won't hide.

Mostly it is just dirty.

Comes with mounting hardware, aluminum intercooler scoop / shroud, 3" up pipe (has hole for alchy), two "T" style hose clams and all hoses (black).

2" to 3" for turbo to intercooler.
3" for intercooler to up pipe.
3" to 2 1/2" for up pipe to throttle body.

 

[jsta6]

:d

 

[jsta6]

:d

 

[jsta6]

Sold to Freddy!