pully set removal

[1SICGN]

just purchaced billet pully set and not to sure on how to remove alternater fan and pully plus the power steering pully..any tips on removal will be great...thanks

 

[onequicks10]

For the alternator, your best bet is to use a impact wrench to remove the nut, swap out the the pulley and fan, use the impact to tighten the nut, give it a couple of good burps and you should be good to go. On the power steering pulley, you will need the a special tool that you can rent from most autopart stores and here are some links on how to use it.

YouTube - How To Remove the Power Steering Pulley From the Pump

YouTube - Power Steering Pulley Installation How To

Good luck,
Jason

 

[novaderrik]

if you don't have an air compressor, then it might be best take the alt and pump to a machine shop or service station where you know someone and have them swap the pulleys for you. it will take about 10 minutes total.

 

[1SICGN]

will do thanks for the link...