Push Rod

[bluezone]

I need some help on push rod measurement.... I have a 3.8 stoker with DLS 218-218 billet cam & GN1 14 bolt heads.... I will be running T&D roller rockers... I will like to order roller rockers & push rods.... Is there any one out there running this setup

 

[forcefed3.8's]

You need to assemble everything and measure. There isn't alot of adjustment on the T&D's.

 

[dpasadena]

I would get the rockers first and then measure for the rods with a push rod checker. Too many variables that could cause different lenghts. You might get lucky though.

 

[bluezone]

Okay thanks

 

[turbo nasty]

T&D's have 2.5 turns of adjustment range, that is .050 of adjustment per complete turn.

Order a pushrod length checker from Jegs that Comp cams makes

Comp Cams 7703-1 Comp Cams Pushrod Length Checker

The valve tip geometry with shaft rockers are pretty much what they are going to be due to the inability to raise/lower the shaft.