UPDATED** Buick Turbo V6- Grand National Engine Parts: Turbonetics, TA Lifters, Crank, Scorpion Rockers_

[BUICKTIME]

UPDATED PRICE$, all parts must go! Parts came out of a good running engine that I took out of the car just to change the cam but found a small crack, now I am parting out the engine. The engine and parts below have approximately 3k miles (*unless otherwise noted). I have plenty of pictures I can send at your request. PLEASE do NOT waste MY time, serious buyers only, PLEASE!!! Don’t hesitate to ask any questions. Preferred Cash local pickup, especially for the bigger heavier items. Local pickup is Oceanside (Long Island), NY 11572

– Turbonetics 6965 BB (larger compressor housing) 4 bolt exhaust housing with V-Band in great shape (older style turbo but bada$$)_ $850- $700
– TA Hyd. Roller Lifters (TA-1412)_ $370- $320
– Scorpion 1.55 Roller Rockers for GN1 Aluminum Heads (complete set with the correct center/off center rockers & guides)_ $370- $300
– Stock Crank- cut .010 mains & .010 rods (needs to be cut/balanced)_ $350- $200
– Stock Crank- cut .020 mains & .010 rods (needs to be cut/balanced)- (*mileage unknown)_ $250- $150

- Complete Rotating Assembly: 40 over Diamond Pistons, Scat Hbeam Rods, stock crank_
–SOLD- 4x Billet Caps (2 centers, rear and front Main Caps)- USED_SOLD
–SOLD- Stock Rods and pistons (*mileage unknown)_SOLD
–SOLD- STAGE 2 Off Center- Ross pistons (4.020”) and 6.5” Carillo rods- ONLY 4 PIECES, hard to find and make for great back-ups (*mileage unknown)_SOLD

 

[BUICKTIME]

more pics

 

[WarWagon]

1st in line for stock rods on stock pistons.

 

[TireFryer]

Pming you

 

[BUICKTIME]

Responded to pm's.

Mario

 

[Walt03]

Rotator came out of a perfectly running engine that was taken out just to change the camshaft but with my luck I found a crack in the block and now parting out the engine. The engine and parts below have approximately 3k miles (*unless otherwise noted). I have plenty of pictures I can send on request. PLEASE do NOT waste MY time, serious buyers only, PLEASE!!! Don’t hesitate to ask any questions. Preferred Cash local pickup, especially for the bigger heavier items. Local pickup is Oceanside (Long Island), NY 11572

– Complete Rotating Assembly: 40 over Diamond Pistons, Scat Hbeam Rods w/ARp bolts, stock crank (10 under- rods & mains), balanced flywheel (SFI exp.) and balanced Harmonic balancer (complete externally balanced rotator)_$1,600
– TA/Morel Hyd. Roller Lifters TA-1412_$400
– Scorpion 1.55 Roller Rockers for GN1 Aluminum Heads (complete set with the correct center/off center & guides)_$400
– Turbonetics 6965 (8 bolt compressor housing) 4 bolt exhaust housing with V-Band in great shape (this is a bada$$ turbo)_$850

–SOLD- 4x Billet Caps (2 centers, rear and front Main Caps)- USED_SOLD

– Stock Crank- cut .020 mains & .010 rods (will need to be cut)- (*mileage unknown)_$250
– Stock Rods and pistons (*mileage unknown)_$150
– STAGE 2 Off Center- Ross pistons (4.020”) and 6.5” Carillo rods- ONLY 4 PIECES, hard to find and make for great back-ups (*mileage unknown)_ $200

Mario, I'm interested in the rotating assembly, .40 pistons, rods, crank, flywheel, balancer, What is your best price?
Are you going to Bowling Green next week?

Walt Mucha, Nashville TN, cell 615-838-6223 Mario, call me, I got cell blocker and I'll call you back. Thx.

 

[BUICKTIME]

Parts shipped and tracking sent. Listing will be updated shortly.
thank you fellas, Mario

Okay Walt, will contact you this morning

 

[BUICKTIME]

UPDATED PRICE$