You can type here any text you want

QA1 14"-130lb. coilover springs

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Mike E

Mr. Badwrench
Joined
Oct 9, 2006
Messages
1,476
I have a new set of QA1 14-130 coilover springs. These work very well for the rear of most turbo buicks. I need a shorter spring with a higher rate for my car because I have adjustable mounts. These are $40 each new plus shipping. I would like to get $75 shipped for both obo.
 
I have a new set of QA1 14-130 coilover springs. These work very well for the rear of most turbo buicks. I need a shorter spring with a higher rate for my car because I have adjustable mounts. These are $40 each new plus shipping. I would like to get $75 shipped for both obo.
Hi , I ve been messing around with rear spring rates on my rear QA1 coil overs did you have good luck with the 130lb springs ? thank you
 
I have a new set of QA1 14-130 coilover springs. These work very well for the rear of most turbo buicks. I need a shorter spring with a higher rate for my car because I have adjustable mounts. These are $40 each new plus shipping. I would like to get $75 shipped for both obo.
Hi , I ve been messing around with rear spring rates on my rear QA1 coil overs did you have good luck with the 130lb springs ? thank you
 
I have a new set of QA1 14-130 coilover springs. These work very well for the rear of most turbo buicks. I need a shorter spring with a higher rate for my car because I have adjustable mounts. These are $40 each new plus shipping. I would like to get $75 shipped for both obo.
Hi , I ve been messing around with rear spring rates on my rear QA1 coil overs did you have good luck with the 130lb springs ? thank you
 
The 130 lb rate was fine. The qa1 springs I had in front would coil bind easily, so I switched to hyperco all around with the same rate.
 
looking at the hyperco website , nice stuff do you use your QA1 shocks and their springs ? is that correct thank you
The 130 lb rate was fine. The qa1 springs I had in front would coil bind easily, so I switched to hyperco all around with the same rate.
 
I didn't have QA1 shocks. My car uses coilover springs in the stock location. I have Viking shocks in the rear now.
 
Back
Top