Question about the ScanMaster power source

tim_dogg

New Member
Joined
Jun 15, 2015
So I've seen that when installing the scan master, a good power source is the IGN terminal of the fuse box.

I just want to double check so I don't fry my car, would i just tap into the "IGN 1" terminal by the blue piece that says 15?


Sorry if this question has been asked. I've just seen people say to connect to the IGN terminal but with me being a novice I just wanted to make sure.... Thanks guys!


Screen Shot 2017-11-29 at 11.04.58 AM.png
 
If you don't want to run a wire all the way to to fuse box, the yellow wire that powers the radio works fine. (there's a ground wire back there too).
 
Top