I have an EXTENDER EXTREME CHIP now with 55lb injectors. I would like to change out my low Z computer and add 80lb injectors. Would I need a New chip or to have this one reprogrammed?
I also have the Translator + and would like to move to the Gen 2 anything I should know before such a move?
Also my idle has always moved around from 825 to 925. I have chased this for a year or so now.
Any idea what might cause this? I have replaced every vacuum line on the car and tested them for leaks. I also sent my injectors to have them tested and cleaned. All was fine with them. I also have dual fuel pumps in the tank. I have checked the fuel pressure and it is set at about 46-47 line off. I also have some questions about the TR6, But will hold them for now. I know this is a lot I really appreciate your time.
Thanks for your input and help.
I also have the Translator + and would like to move to the Gen 2 anything I should know before such a move?
Also my idle has always moved around from 825 to 925. I have chased this for a year or so now.
Any idea what might cause this? I have replaced every vacuum line on the car and tested them for leaks. I also sent my injectors to have them tested and cleaned. All was fine with them. I also have dual fuel pumps in the tank. I have checked the fuel pressure and it is set at about 46-47 line off. I also have some questions about the TR6, But will hold them for now. I know this is a lot I really appreciate your time.
Thanks for your input and help.