Question xfi 02 senser

[ALVAROG1983]

Ok just trying to see where is the best spot to put my 02 senser at the tial of the down pipe by the dump pipe or 8 inchs away from the turbo on my dp thanks.

 

[HighPSI]

Either position will work. If you get to close to your dump pipe, it can read incorrectly at idle when you open the dump. Most people mount it up high so it is less likely to get damaged.

 

[ALVAROG1983]

Down pipe it is thanks.

 

[HighPSI]

Don't put it pointing straight down or straight up. I usually clock it around 10 o'clock or 2 o'clock

 

[ALVAROG1983]

02 senser location

don't put it pointing straight down or straight up. I usually clock it around 10 o'clock or 2 o'clock

i was thinking of putting it at 10 o'clock and about 8 inchs away from the turbo thanks for the input.

Al

 

[UR50SLO]

Cal...... What's the problem with it going streight up?

How can I tell if my sensor is on the way out? I'm having some strange issues popping up

all the sudden (7yr old sensor)

And I had my Classic FAST converted to Sequential... with "Any O2"

What sensors could I purchase for it with that enabled?

Thank you.. hope this is relivant to this topic.
~Scott