I am in the process of having my heads ported, I have sent them out to have them checked for cracks and should have them back in a few days. It will be a light porting nothing to major, but was wondering what type of cam shaft and springs most of you guys are using, this may or maynot be a future upgrade depending on whether a different cam is needed. I will stay with stock turbo and injectors until next winter. Still learning, so any ideas are appreciated.
Re: What cam w/ported heads?
- Thread starter bwallace
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
i'm porting my heads as well, but am going back with a stock cam. i think for anyone who is not experienced with turbo regals, like me, is best to do mods slowly and not several at a time. i don't want my combination to get thrown off. So i'm going back with a stock turbo and injectors as well.
I hopefully won't be opening up the engine anytime soon, I thought someone might have some ideas on what cam works best w/ported heads or after porting should my next step be somewhere else (still learnin). Thanks for the post Brian good luck with the heads also. I haven't started yet but let me know how it goes.
I too have a 206/206. Mine is a comp cam. It runs very well. I also have a 218/218 in the other car. Both of the cars have ported and polished heads. I personally like the feel of the 206 cam better.
Yes, you might even have ticking noises even if the pre-load is correct.
Yes, you might even have ticking noises even if the pre-load is correct.
