RELAY

[t3intercooled]

hey, I have a hotwire kit for my fuel pump. I thought thepump was bad, so I got another one but it still.has 0 fuel pressure. all fusea are good pump electronics are plugged in, so I assume being all those are good its the relay with the hotwire kit thats bad. correct? and dkes anyone have a partnumber and place to.get new relays? thanks in advamce for answering

 

[t3intercooled]

ttt

 

[t3intercooled]

ttt

 

[GNVenom]

http://www.casperselectronics.com/store2/product_info.php?products_id=1044

 

[t3intercooled]

is there any way to temporarily bypass the relays

 

[turbojd]

is there any way to temporarily bypass the relays

Disconnect the relay and hook the wires back up stock.

 

[t3intercooled]

whats wires specifically? its been years since I did it, can anyone give a link to a procedure or explain exavtly whats wires to hook up where

 

[turbojd]

My relay kit 30 amp fuse is located under my rear bumper, not sure where yours is located, if it;s like mine just disconnect the stock wire from the hot wire relay and snap it back into the factory wire right next to it.

 

[t3intercooled]

this may be a stupid question but which one is the stock wire?

 

[turbojd]

If your relay is located there like mine, you can't miss it, the factory harness will ne plugged into the 30 amp relay, disconnect it and hook it up to the other stock wire that will be right there, I believe you will see the wire coming over the middle of the gas tank towards the rear bumper.