gunslinger
Member
- Joined
- Nov 21, 2005
- Messages
- 1,191
While doing my valve springs today, a couple of my pushrods looked awfully close to the holes in the heads. The pushrods are clean, and don't show any signs of irregular wear.
The rockers aren't stamped "L" and "R", and the pushrods are all centered in the rockers. Do I need to order another set of rockers or are the non-offset ones okay?
The rockers aren't stamped "L" and "R", and the pushrods are all centered in the rockers. Do I need to order another set of rockers or are the non-offset ones okay?
