roller rockers

[QUIP'6']

i just finished porting and polishing intake and heads now i plan on keeping stock cam for it is still good after 65,000 miles anyway can i put different ratio rockers to get more lift on cam

 

[Quicksilver]

Harland-Sharp as well as T&D Machine make 1.6 and 1.65 roller rockers for the stock heads. They both require the mounting pedistal to be clearenced. (do this before torqueing the heads down)
IMO, it is less expensive to change the cam and lifters (flat tappet) than to install roller rockers and push rods. HTH :wink:

 

[QUIP'6']

thanks i'm scared of wiping a lobe