Running nitrous and alky...

[GnTooFast4u]

Well I just rebuilt my motor with some nice parts too many to list. My motor is well built, real strong. I plan to run 100 shot nitrous with alky on 93 pump gas. Can I pull that off with out knock. How much boost am I lookin at with both engaged. Everything in my engine is forged,balanced,blue printed, arp studded. In other words my engine is solid. I know I have to get a new chip with about 18-19 degrees timing or which chip? I heard 50 shot is 80 rear wheel hp so I'm guessing 100 is equivalent to 160hp. Once I get my new turbo and injectors I believe I'm gonna be looking at 340hp on the motor dont know how much torque. And with the alky and nitrous I should be above 500hp. What will that put me at et wise. What yall think.

Allan

 

[YGETV8]

I'm no expert, but I'd think that since the "effective" higher octane with alky use is a result of cooling the intake charge and your nitrous will do that anyway (and better), you may be beating a dead horse running both. Not sure, though... anybody else?

 

[Turbo__Tim]

http://turbobuick.com/forums/showthread.php?s=&threadid=32427

Here is the best thread I can remember, check it..

I think adding alchy to the mix is a good idea. A little bit of insurance. True the intake charge is much cooler, but I would guess that more cooling is needed.

YGETV8 How is the car running now that the vacuum leak has been found? Sheesh, I thought we would never get to the end of that one...

 

[TurboTR]

Sent you a PM.

TurboTR

 

[YGETV8]

<<YGETV8 How is the car running now that the vacuum leak has been found? Sheesh, I thought we would never get to the end of that one...>>

Not too well. Everything I did helped some, but still isn't right. Haven't had much time to tinker with it lately, unfortunately. Thanks for the concern! Jay