San Diego area Scanmaster needed

[sd-slider]

Anyone in the San Diego area have a Scanmaster I could hook up to compare the output to my WinALDL and Turbometer output?

I have an "off" idle issue I wanted to sleuth out before the trip yo Nates next Sunday.

 

[black owned]

Anyone in the San Diego area have a Scanmaster I could hook up to compare the output to my WinALDL and Turbometer output?

I have an "off" idle issue I wanted to sleuth out before the trip yo Nates next Sunday.

is it possible for any locals to help eric out?he literally gave me the shirt off his back.please help him out,im sure he'd help you.

 

[Mattzoom]

I would love to help but i dont own one srry

 

[sd-slider]

Anyone using WinALDL or Turbometer Pro?

I'd rather not base my troubleshooting on sketchy output...

For reference:

The O2 voltage @ idle(700-775) is .230-.780 over a 30 second period
MAF appears to be holding steady @ 4/5, climbs to 15 @ 2000, and returns to 4/5 after revving to ~2000
TPS = .41
BLM = 126-131
Int = 128-131 @ all RPM's

Next step will be MAF swap, O2 sensor replacement, lazy injector test...

Any ideas?

Might have to enter the Accord in the show at bates...after all, it's Just A Six!

Thanks,
Eric

 

[sd-slider]

Swapped out the MAF...no change.

Checked resistance across the coil posts...13.75-14.25(normal)

Fuel pressure checks out 38/43 per specs....

I have a new Denso O2 sensor in will-call, but can't get it til tomorrow....

Any ideas?

Any help would be greatly appreciated.

 

[sd-slider]

Pulled the plugs and they were clean...

We'll see what the O2 swap does tomorrow.

Thanks Mike B. for the guidance/advice.

 

[BlackBandit]

You ever get this straightend out? I'll shoot you a pm with my phone number and we can get together if you want. I live in Imperial Beach and I'm going out of town friday so let me know. james

 

[sd-slider]

You ever get this straightend out? I'll shoot you a pm with my phone number and we can get together if you want. I live in Imperial Beach and I'm going out of town friday so let me know. james

James,

Got your PM. Thanks!

I replaced the O2 sensor(w/ Denso) and it didn't seem to make awhole lot of difference. I also removed the up-pipe and cleanedthe entire area in and around the butterfly inside the TB opening. Still have a smaller version of the same issue. She seemed to cruise fine all the way to Bates and back yesterday, it's the idle that's giving me fits....

I'll give you a call later today.

Thanks again,
=Eric