Santa Claus is early !!!!!

[mrsyclone]

Hi folks, just wana show this, we´re not sleeping thru the winter over here..

Satnta stopped by on his pickup travel to the northpole and guess what?? he dropped the hayfan for his table where rudolf and dear friens vaiting for the X-mas runs.

The TURBO is a GT 47 BB suports 1500 Hp+ and is gona give the Sy record a challenge next summer.. ( my best time 8.98/157mph with GT45BB)

This summe was a small disaster but we learnd alot, one mayor problem was the intercooler temp, this problem is solved now, we build our own cooler that will suport 1800 Hp..

Hope U have a good X-mas, see ya next year ;D

 

[fbodlovr]

That is one massive turbo. What size is that? mm wise. What size engine do you have as well?

 

[mrsyclone]

That is one massive turbo. What size is that? mm wise. What size engine do you have as well?

88mm / 4.7 l v6

 

[fbodlovr]

Where did you get a 4.7 at? Buick block bored out?

 

[SS/GNX]

probably a stroked or bored 4.3L cyclone/typhoon motor...

My guess anyway...

Huge turbo, HUGE intercooler!

 

[grocerygetter]

Tha Sy is going to get it!

 

[Boost231]

o hell ya.

 

[davinci50]

thank god for All wheel drive, or can't it take that abuse.

 

[jurassic five 7]

What could this turbo take you to? low 8's?

Would LOVE to see you come back to the US and run at the SY/TY Nats! :tongue:

-Adam

 

[87NAT]

Hey.. my PTE IC didnt come with any beer.

 

[ChavoLC2]

That is sweet

That's sweet ol' Santa visited you early! Wish I was that good of a boy to get a Big GT-Turbo and FMIC like that. He visited me too nothin like your gift but a Real SSTial 38mm Wastegate from Mrs. Claus she found it new for 200 couldn't believe it. Need to take off the old Deltagate and put this beaut on. I get a beaut and you get a brute. Santa just ain't fair sometimes. Good Luck obtaining your Record!

 

[GNVYUS 1]

Damn, that is huge and haulin the mail at 8.98.

What thickness is that FMIC, 6"??

Why not run alky injection to guarantee low inlet temps??

Is this an AWD drivetrain??

 

[mrsyclone]

Damn, that is huge and haulin the mail at 8.98.

What thickness is that FMIC, 6"??

Why not run alky injection to guarantee low inlet temps??

Is this an AWD drivetrain??

I have Alky on =) and 50 hp nos to get low intake temp=)

 

[mrsyclone]

What could this turbo take you to? low 8's?

Would LOVE to see you come back to the US and run at the SY/TY Nats! :tongue:

-Adam

My plan is to come and race in usa 2008 =)

 

[HighPSI]

Looks good Robert! If you come to Florida, come by and see me again.

 

[ChavoLC2]

Awesome ride

That is sure is a clean alky and nitrous setup. Pardon my ignorance wasn't your truck featured in GM High Tech not to long ago? One smokin ride and a nice write up.

 

[Nova67ss]

That is sure is a clean alky and nitrous setup. Pardon my ignorance wasn't your truck featured in GM High Tech not to long ago? One smokin ride and a nice write up.

Yes, the Valkyrian story.

Would love to go back to US with Robert and race the "Bad A$$" truck again as a "wrenchbitch" in his team

will see what happens, and its gona be faster than ever next year..