Slipping 2-3 shift

[1BAD_GN]

Trans is slipping during the 2-3 shift. Also, the lockup solenoid sticks after long drives. Scanmaster is giving a code 24 for VSS sensor.


Posted from the TurboBuick.Com mobile app

 

[1BAD_GN]

Any suggestions?


Posted from the TurboBuick.Com mobile app

 

[kidglok]

Any suggestions?


Posted from the TurboBuick.Com mobile app

Put a th400 in the car


Posted from the TurboBuick.Com mobile app

 

[1BAD_GN]

Put a th400 in the car


Posted from the TurboBuick.Com mobile app

Lol...I want to keep the original setup


Posted from the TurboBuick.Com mobile app

 

[TexasT]

Might be time for an overhaul. Replace the tcc solenoid at that time. Might need a VSS sensor too.
Once the direct clutches get to slipping it doesn't get better by itself.

Posted from the TurboBuick.Com mobile app