You can type here any text you want

sputtering but no knock

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

ITSNOTAGN

Shadow Master
Joined
Dec 22, 2002
Messages
662
using an smc single nozzle. jst got it on today, having a few problems. im getting knock and my o2s are in the mid 8s, low 9s. and when i turn it up it goes away but my boost drops about 2lbs, and o2s go into the 9s. when i tune the o2s for low 8s, i get knock right away. any ideas? maybe a coil pack going bad?
 
Too much fuel, not enough alky.

You didnt say how much boost, at what PSI your turning it on, and O2's in the 800+ are not gonna be happy.

Bet a chip change would work wonders.
 
you need to tune your car to run between 780-800 o2's at WOT on 93 pump gas and alky...either turn up the boost or drop the fuel...leaner is meaner and use the alky to compensate for fueling demands
 
Back
Top