turbobitt
Well-Known Member
- Joined
- Feb 14, 2002
- Messages
- 2,465
Converted carb intake for on center block and Stage 2 heads. Intake is complete with 70mm Acufab throttle body w/Hemco plenum, Idle air adapter and motor,Throttle position sensor, Throttle linkage, throttle bracket, coil bracket, 96# injectors, fuel rails and hold downs, 160 thermostat and water neck, Air temp sensor installed in back of intake, and water temp sensors for fan and computer.
$800 + shipping firm
Precision Front mount intercooler, very good shape. Sold as Intercooler only with no pipes - $400 OBO Plus shipping
TH400 precision industries 3500 stall converter. Only 10 passes and limited street miles.
$300 plus shipping
Set of used Stage II JE pistons for,
4.00" bore
3.625 stroke
1.210 pin height
6.5" rod
.927" pin
Double pin oilers
1.2mm / 1.5mm / 3mm ring grooves
Valve reliefs for stage II head
8.5:1 compression
Pins and support rails not included
$250 plus shipping
$800 + shipping firm
Precision Front mount intercooler, very good shape. Sold as Intercooler only with no pipes - $400 OBO Plus shipping
TH400 precision industries 3500 stall converter. Only 10 passes and limited street miles.
$300 plus shipping
Set of used Stage II JE pistons for,
4.00" bore
3.625 stroke
1.210 pin height
6.5" rod
.927" pin
Double pin oilers
1.2mm / 1.5mm / 3mm ring grooves
Valve reliefs for stage II head
8.5:1 compression
Pins and support rails not included
$250 plus shipping