Stage II On center engine for sale

[750H.P.V6]

Guy's,

I have a Stage II On center engine I've been planning to build but never finished. I had posted it in the South West forum earlier because I DO NOT want to ship it. I'm still looking to sell it locally but posting it here in hopes of generating more serious interest.

Stage II On center block 153 4.005" bore no damage, roller cam bearings, freshly machined, ready to assemble.

BMS 3.625" stroke crank STD/STD no damage, weld repairs etc. cleaned, and magged.

Carrillo 6.500" rods re-sized and re-bushed by crower. BME pistons

Stage II heads fully ported, fresh valve job, surfaced, with new stainless intake and inconel exhaust valves.

Solid roller cam 232/232 @.050" 114 LSA. Solid roller lifters, Jessel rockers. Powder coated valve covers, timing set or gear drive.

Converted On center 4BBL intake with Hemco plenum. Misc. gaskets, bearings, wet or dry sump timing cover, dry sump pan. Needs rings and pushrods.

All machine work was done Dec. of last year and cost over $2k. I never found time to assemble the engine. Asking price is $ 7k. Price is not negotiable. Pics and receipts available.

Thanks

Neal

 

[III'S 87 GN]

Guy's,

I have a Stage II On center engine I've been planning to build but never finished. I had posted it in the South West forum earlier because I DO NOT want to ship it. I'm still looking to sell it locally but posting it here in hopes of generating more serious interest.

Stage II On center block 153 4.005" bore no damage, roller cam bearings, freshly machined, ready to assemble.

BMS 3.625" stroke crank STD/STD no damage, weld repairs etc. cleaned, and magged.

Carrillo 6.500" rods re-sized and re-bushed by crower. BME pistons

Stage II heads fully ported, fresh valve job, surfaced, with new stainless intake and inconel exhaust valves.

Solid roller cam 232/232 @.050" 114 LSA. Solid roller lifters, Jessel rockers. Powder coated valve covers, timing set or gear drive.

Converted On center 4BBL intake with Hemco plenum. Misc. gaskets, bearings, wet or dry sump timing cover, dry sump pan. Needs rings and pushrods.

All machine work was done Dec. of last year and cost over $2k. I never found time to assemble the engine. Asking price is $ 7k. Price is not negotiable. Pics and receipts available.

Thanks

Neal

email sent !!

 

[750H.P.V6]

Don,

I sent you a response. I'll forward some pics a bit later tonight. I'm going to post a few here as well once I can figure out how to re-size them.

Neal

 

[gnxtc2]

Neal

Willing to part it out?

Billy T.
gnxtc2@aol.com

 

[750H.P.V6]

Not right now Billy but I'll keep you posted.

THX

Neal

 

[The Joker]

care to post some pics??

 

[750H.P.V6]

Like I said above I can't seem to re-size them with any program I have on my computer so until I can figure it out e-mail me if you're interested. I'll send you some really high resolution pics. :wink:

Neal

 

[gnxtc2]

Set up a free account at Image hosting, free photo sharing & video sharing at Photobucket and load the pics over there. Once the pic are loaded on photobucket, there is a spot under the pic that starts with IMG. Click in the IMG and it copies and re-sizes the pic for BBs automatically. Then take the copied link and post it in the main body of the message over here on TB.

Billy T.
gnxtc2@aol.com

 

[kcalvin]

Stage 2 on center

PM sent

 

[750H.P.V6]

Guy's,

With help from my wife I think I've been able to re-size the pics to allow them to be up loaded here. I'll give it a shot.

Neal

 

[750H.P.V6]

On center block

 

[750H.P.V6]

Bottom View

 

[750H.P.V6]

Heads

 

[750H.P.V6]

Pistons

 

[750H.P.V6]

It looks like that worked. :biggrin: I have more pics of the rest of the parts but I don't want to use up too much bandwidth here. Thanks for all the interest.

Neal

 

[750H.P.V6]

Lots of interest but no $$ yet. Why build a stock block when you can have a Stage II motor for this price? :biggrin:

Neal

 

[750H.P.V6]

Sale Pending

Thanks to all that inquired.

Neal

 

[750H.P.V6]

Sold Sold Sold!!

Thanks Guys!

Neal