You can type here any text you want

start up numbers?

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

racemybuick

Hot Air Teacher/Student
Joined
Apr 3, 2003
Messages
1,174
what is a good start up fuel pressure reading for stock injectors and pump? I just installed my new 100lb fuel guage on the rail and have about 38-42 lbs. is that ok?

John
 
You want to look at static FP (with regulator vac line off). With a stock 233 regulator static FP should be 34-40. With the 237 regulator (what came on the TTA, and is considered an upgrade) static FP should be 37-43.
With the vac line on the #s will go down roughly 6+/- psi. Focus on the static reading, and then when your driving watch that your FP rises with boost (FP should = static FP + boost).
If you have a custom chip and an adjustable regulator, then set the static FP at whatever is recommended by the chip maker, and start there. 43~psi static is usually a good # to start with.
 
Back
Top