FastRegalWE2
Wish I had another Buick!
- Joined
- Jan 10, 2004
-Shell with frame, no suspension-$1000
-FORGED Long block, Internally balanced
-.040 over 109 (decked .020) , Diamond pistons and rings, K1 rods, cleveite bearings, Eagle crank, JW flexplate, BHJ balancer (BOTH SFI Approved). RJC girdle, PORTED GN1 14 bolt heads (decked .008) with pedestal mount Scorpion 1:55 roller rockers. Ported stock lower intake, heads ported to match intake. ARP head and main studs. Revolution X 215/220 roller cam, Comp roller lifters. Rollmaster billet timing set, upgraded front timing cover with oil passages drilled. 2200 street miles, no track passes-$4500. Engine was built by Red of Eastern Virginia Turbo Buicks in Nov of 2006.
-83# inj- $300
-Champion billet fuel rails with braided SS crossover for stock style FPR $200
-FAST XFI with Caspers Buick adapter box, ready to go, never installed $1700
-ATR 3" external DP, JH coated but peeling near WG $300
-Turbonetics Evolution WG, multiple springs- $200
-Complete rebuild front end kit, all urethane bushings, new ball joints, tie rods etc PST components--$300
-RJC billet pullies- complete set $425
-ATR driveshaft safety loop $50
-4 Kirbans springs front/rear $200 2200 miles
-Accell coil and GM CCCi- $200 2200 miles
-Complete -8 AN fuel feed line with y-block at tank for dual in tank pumps $200
-Dual intank Walbros 255 lph with hangar $200
-Metco lower rear trailing arms $225 with weld on relocation brackets $225
-Metco adj upper rear control arms $225
-complete vacuum brake conversion $100
-F Body alum radiator $50
-aluminum bumper supports front and rear $75 each
-Some left 87 Interior, T-Top car
-Fenders, clean, no rust $100 each
-Caspers MAF/TPS/FAST harness $50
I will probably add more stuff later
All prices are less shipping, Pay Pal add 3% for their fees. I do need some time to get boxes together and get things packed up as they sell. I have 2 jobs so time is short and I also have to drop off the stuff in town at Fed Ex since I live rural they wont pick it up from my house. If a part is something needed ASAP, please let me know ahead of time.
Thanks
Jeff
-FORGED Long block, Internally balanced
-.040 over 109 (decked .020) , Diamond pistons and rings, K1 rods, cleveite bearings, Eagle crank, JW flexplate, BHJ balancer (BOTH SFI Approved). RJC girdle, PORTED GN1 14 bolt heads (decked .008) with pedestal mount Scorpion 1:55 roller rockers. Ported stock lower intake, heads ported to match intake. ARP head and main studs. Revolution X 215/220 roller cam, Comp roller lifters. Rollmaster billet timing set, upgraded front timing cover with oil passages drilled. 2200 street miles, no track passes-$4500. Engine was built by Red of Eastern Virginia Turbo Buicks in Nov of 2006.
-83# inj- $300
-Champion billet fuel rails with braided SS crossover for stock style FPR $200
-FAST XFI with Caspers Buick adapter box, ready to go, never installed $1700
-ATR 3" external DP, JH coated but peeling near WG $300
-Turbonetics Evolution WG, multiple springs- $200
-Complete rebuild front end kit, all urethane bushings, new ball joints, tie rods etc PST components--$300
-RJC billet pullies- complete set $425
-ATR driveshaft safety loop $50
-4 Kirbans springs front/rear $200 2200 miles
-Accell coil and GM CCCi- $200 2200 miles
-Complete -8 AN fuel feed line with y-block at tank for dual in tank pumps $200
-Dual intank Walbros 255 lph with hangar $200
-Metco lower rear trailing arms $225 with weld on relocation brackets $225
-Metco adj upper rear control arms $225
-complete vacuum brake conversion $100
-F Body alum radiator $50
-aluminum bumper supports front and rear $75 each
-Some left 87 Interior, T-Top car
-Fenders, clean, no rust $100 each
-Caspers MAF/TPS/FAST harness $50
I will probably add more stuff later
All prices are less shipping, Pay Pal add 3% for their fees. I do need some time to get boxes together and get things packed up as they sell. I have 2 jobs so time is short and I also have to drop off the stuff in town at Fed Ex since I live rural they wont pick it up from my house. If a part is something needed ASAP, please let me know ahead of time.
Thanks
Jeff