Stock Pushrod length

[RossGN]

What is the stock pushrod length for 86 GN? Currently has adj pushrods and trying to chase down a mid rpm lifter noise.

 

[proptop]

8.684 I do believe.
Thanks,
Bob

 

[RossGN]

Thanks Bob......push rods measure right at 8 - 11/16"

 

[earlbrown]

You can't measure pushrods and get an accurate measurement. The numerical length is from end to end of the imaginary line formed if the ends didn't have a hole in them. So it takes some match after measuring the I.D. of the oil holes and diameter of the ball ends.

 

[RossGN]

Aren't the stock pushrods all the same length?