Stuff to clear out... (Local sales only)
- Thread starter HI85WH1
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
OK... but it doesnt fit in the trunk of the GN... and I aint laying it across the front seat!
I'll just tie it to the roof of the GN with some twine I got from City Mill...
I just need a passenger to hold it there with one arm out of the window while I drive home...
Just throw it under the house... I'll pick it up one of these days/weeks....
I just need a passenger to hold it there with one arm out of the window while I drive home...
Just throw it under the house... I'll pick it up one of these days/weeks....
I'll take 'em - what flavor slurpee?
Whatever...
Also:
LC2 Intake and Plenum,
Pulleys, Balancer (stock), Timing cover, and the rest of the parts from that 5 cylinder LC2 I have...
Accessory bracket. Power steering reservoir?
The big aluminum one?... no spare.. that motor didnt have one... though I may dismember the complete motor shortly... not enough room in the carport for 3 bikes, a g-body (choose one) and an LC2/BRF combo on a cart...
Guy... I think I found the accessory bracket... gotta stop by Chad's this week to pick up some other stuff... and I'll verify if there is an PS resivoir there...
Probably Tues or Weds, I'll call you.
Lee, I assume you want the same part Guy already asked about. (accessory (PS and AC) bracket.
LMK on the rest though... I'd like $50 for the intake and plenum, bare.
Merry Christmas and a Hapy New Year!
HI Rob, would you have any GN body parts (GN bumpers) or SS monte body parts for sale?
Update, I bought a bunch of parts to install on the T and the 86 SS. The SS, I installed a SMI stage 2 ccc carberator, a flex-a-lite plastic fan, red energy suspension trans and engine mounts, polished 3 piece pulleys, goodyear hi-miler hoses, and four 15x8 centerline "split spoke wheels" and BFG G Force Drag radials to the rear. Also the T has metco contol arms and an H&R trans mount.
In my son's room (lol), I have all new in the boxes, a GN pypes cat back system, two 8.5 T/A rear girdles, four bilstein shocks, four 15x8 Weld pro star wheels, 2 mickey thompson drag radials, 2 micky thompson 235/60/15 tires, a nos GN rear spoiler, opg 2 inch drop coil springs (rear), 2 sets of red in color UMI adjustable uppers (one with spherical ends), one red in color lower UMI control arm set, red in color umi control arm braces, 2 UMI red rear sway bars, one new master cyliner, grease seals/ineer & outer bearings, slotted rotors for the conversion to the T -powermaster took a crap. (whew) Even new headlight bezels.
(focus is on the SS first) Gonna put deeper gears in the take off 8.5 GN rear like (4.10), new bearings, seals, replace the u-joints from the GN driveshaft, and a overhaul for the BRF trans (any recommended shops?). Future parts include a TCI 2,400 stall converter for the stock (400 Dart SHP block), AFR 235 heads, and a comp cams roller cam set-up for 2010. Installer for the motor and tranny is Mr. Villacorte hopefully.
Sorry about the long message, gonna install some suspension parts after Christmas. Take care
HI Rob, would you have any GN body parts (GN bumpers) or SS monte body parts for sale?
Update, I bought a bunch of parts to install on the T and the 86 SS. The SS, I installed a SMI stage 2 ccc carberator, a flex-a-lite plastic fan, red energy suspension trans and engine mounts, polished 3 piece pulleys, goodyear hi-miler hoses, and four 15x8 centerline "split spoke wheels" and BFG G Force Drag radials to the rear. Also the T has metco contol arms and an H&R trans mount.
In my son's room (lol), I have all new in the boxes, a GN pypes cat back system, two 8.5 T/A rear girdles, four bilstein shocks, four 15x8 Weld pro star wheels, 2 mickey thompson drag radials, 2 micky thompson 235/60/15 tires, a nos GN rear spoiler, opg 2 inch drop coil springs (rear), 2 sets of red in color UMI adjustable uppers (one with spherical ends), one red in color lower UMI control arm set, red in color umi control arm braces, 2 UMI red rear sway bars, one new master cyliner, grease seals/ineer & outer bearings, slotted rotors for the conversion to the T -powermaster took a crap. (whew) Even new headlight bezels.
(focus is on the SS first) Gonna put deeper gears in the take off 8.5 GN rear like (4.10), new bearings, seals, replace the u-joints from the GN driveshaft, and a overhaul for the BRF trans (any recommended shops?). Future parts include a TCI 2,400 stall converter for the stock (400 Dart SHP block), AFR 235 heads, and a comp cams roller cam set-up for 2010. Installer for the motor and tranny is Mr. Villacorte hopefully.
Sorry about the long message, gonna install some suspension parts after Christmas. Take care
Hi Dale... not yet... with the metal prices as they are body parts cars are becoming scarce again...
I did see a guy on CL who was on the BI that had a nice pair of cherry doors (so they appreared)
other than that... not much... right now trying to buy a parts cutlass... body parts are pretty much rubbish....
I did see a guy on CL who was on the BI that had a nice pair of cherry doors (so they appreared)
other than that... not much... right now trying to buy a parts cutlass... body parts are pretty much rubbish....
Do a search and you will find that the 3.42 rear gears are perfect for the LC2 unless you plan on running a SBC or even a S2.
I think the gear change is for his MCSS
Similar threads
