Ta 60 or Te60

[jbohrer8]

I am going to upgrade my turbo but would like to have some opinions whether to get a te 60 or a ta 60. I really do not care whether i stay stock appearing or not. I have a 3300 stall converter and the stock turbo just aint cutting it. i have 36# injectors for now. and am ready to move up from the stock turbo.

any help would be greatly appreciated,
thanks
John

 

[D's GN]

How fast do you want to go? If you don't race your car that often I would recommend a Limit GT6152, pulls really hard down low to the lower 20's on boost. I ran mine for a while on a stock motor and loved the "pull" it had. If you race it often I would skip the TE60 and go for a TE61, a few on this board have pushed well into the 11's with stock heads and high boost 25+#, you have the stall for it...might want to upgrade injectors with the bigger turbo.

 

[jbohrer8]

car is my daily driver, so i have to keep that in mind. I am a college student so i dont have too much money to spend. but i want to make my gn go faster!!!

 

[wiked87gn]

TA60 you will love it, rocks right off the line and pull pretty good through the whole range..also very good turbo had mine for over 4 yrs not a problem with it.

 

[bruce]

*Chopper* at Limited Eng, said there was less then 3% difference between the two. IMO, it's worth *risking* as much as 3%, to be stock looking.