Ta block build . Solid lifter on hydraulic cam profile - spring recommendation.

[1987]

I am almost done building my ta block, ta headed engine. Looking for spring recommendations s for a “street roller”
(Solid roller lifer on hydraulic roller cam)

Thought this may be the place to ask

Heads are ta se , valves are 100 long .
1.6 ta paired rockers and a 22x roller cam , 570 lift.

Anyone happen to have a similar setup and part number for the springs locks and retainers to get me in the ballpark..? What brand valve spring seems to last longest for the street?

Thanks

 

[Chuck Leeper]

1-800-TAperformance would be a good place to ask.

 

[1987]

yes that is an option, just curious what’s out there ….

1-800-TAperformance would be a good place to ask.

 

[BEATAV8]

PAC 1209X installed at 1.67-1.70 would get you 210-225 closed and up to 510 open..... That might (might) be enough.
Target the advertised open height to keep you away from spring surge. See where you end up on the seat.