TA Perf Valve Covers

[FastRegalWE2]

these were on my engine for less than 1000 miles. They are the krinkle black ones found here from TA Performance
http://www.taperformance.com/vcovers.htm

They were $160 new, selling for $110 shipped to the lower 48. There are a couple of scrathes on them, nothing major. I am switching to a smaller cover because Im changing to adjustable roller rockers and the P/S cover is a PITA to get off. I would trade for a set of GN1 covers or the BUICK covers that are the same size as the GN1 covers. I need to be able to get to the rocker arm easier than with these covers.

 

[CTX-SLPR]

Howdy,

Will these fit stock heads with 1.65 Rollers?

Thanks,

 

[FastRegalWE2]

yes, I had them on my 8445's and there is PLENTY of room for roller rockers. I just need to be able to get into the head easier.

 

[CTX-SLPR]

Roger that, Mine's a hybrid so I don't know how tight that area will be till I start mocking it up. If I remember right there is a good amount of room under the more flat style AC suitcase on the 65 Riv than on a TR but the brake booster might be a bit tight. Are these clearanced on the backs for that kind of thing? I can't remember what the V6 TA covers look like.

Thanks,

 

[Dominic]

Do you have all the bolts/hardware and grommets for these covers? If they are complete and there is only a few small scratches i will take them.

(707) 580-6285 or pm me

 

[FastRegalWE2]

Thevalve covers ARE LEFT AND RIGHT, the right side is cut to clear the A/C box. I do have the bolts I got rid of the grommets because I was running push in filters. Those were $15 each but I will throw them in there for another $10, they have maybe $500 on them since I didnt liek the style I originally had and switched to these.

 

[Dominic]

Originally posted by ws6formula50
Thevalve covers ARE LEFT AND RIGHT, the right side is cut to clear the A/C box. I do have the bolts I got rid of the grommets because I was running push in filters. Those were $15 each but I will throw them in there for another $10, they have maybe $500 on them since I didnt liek the style I originally had and switched to these.

I sent you a PM.

Thank's.

 

[DonnieShort]

I would like to be next in line for the valve covers.