Time to cry push rod length

[WE287GN]

well called up local speed shop ,told him i am looking for 8.600" pushrods

said sealed power dont have em ,and special order on crane or comp somewhere around $130 ouch


any other ideas? if i really have to i will get them ,but really like to find cheaper, if i measured corectly i am 80-90 thou down from stock length

Thanks
Chris Pacheco

p.s. checked in paw didnt see anything that was close enough

 

[Intercooler]

Originally posted by WE287GN
well called up local speed shop ,told him i am looking for 8.600" pushrods

said sealed power dont have em ,and special order on crane or comp somewhere around $130 ouch


any other ideas? if i really have to i will get them ,but really like to find cheaper, if i measured corectly i am 80-90 thou down from stock length

Thanks
Chris Pacheco

p.s. checked in paw didnt see anything that was close enough

Don't anyone use the search feature anymore? www.cvproducts.com

About $75.00 for 12 in any size and they are bad ass!

 

[WE287GN]

Re: Re: Time to cry push rod length

Originally posted by Intercooler
Don't anyone use the search feature anymore? www.cvproducts.com

About $75.00 for 12 in any size and they are bad ass!

i use search,and when i dont seem to find what i am looking for I post..

what exact words would you have typed in? it sometimes is frustrating in the search,feel like your chasing your tail,so i think if someoe can help right off the bat ,thats great and you did,Thanks!! i didnt seem to find the post on cvproducts

thanks for the address though it is much appreciated

Chris Pacheco

 

[y26]

I agree. When doing a search it is so vague.

Maybe intercooler could give us a lesson..

 

[ALBERTAN]

1. Click on the Search button.
2. Enter "push rods" in the Search by Keyword area.
3. Hit Enter.
4. Scroll down through the posts until you find a promising thread.
5. Click it to open it.
6. Scroll down to find your answer.
   [/list=1]
   
   It really is that easy. I found Intercooler's link the first thread I opened.
   
   Of course, I need the search feature much more than anyone else around here so I guess practice makes perfect.

 

[Intercooler]

Originally posted by ALBERTAN

1. Click on the Search button.
2. Enter "push rods" in the Search by Keyword area.
3. Hit Enter.
4. Scroll down through the posts until you find a promising thread.
5. Click it to open it.
6. Scroll down to find your answer.
   [/list=1]
   
   It really is that easy. I found Intercooler's link the first thread I opened.
   
   Of course, I need the search feature much more than anyone else around here so I guess practice makes perfect.

1. Took the words out of my mouth

 

[Intercooler]

Originally posted by ALBERTAN
I found Intercooler's link the first thread I opened.

Of course, I need the search feature much more than anyone else around here so I guess practice makes perfect. [/B]

WE287GN has a couple on pushrods alone: http://www.turbobuick.com/forums/se...d=220847&sortby=lastpost&sortorder=descending

 

[WE287GN]

Originally posted by Intercooler
WE287GN has a couple on pushrods alone: http://www.turbobuick.com/forums/se...d=220847&sortby=lastpost&sortorder=descending

i have posted this question before ,and the answers i got were check ,paw,fm,and speed pro or sealed power something like that

like i said local speed shop came up with nothing so i posted.

all bs asside i have never used search on the top ,didnt even know it was there,i have been using the search box at th ebottom

Chris Pacheco

 

[KWIKR 1]

www.pushrods.net .

 

[y26]

Don't anyone use the search feature anymore?

Is we287gn question that common??

It's not like he is asking "how to do a oil change" or "What plugs should i use????

 

[S2V6RACER]

Originally posted by WE287GN
i have posted this question before ,and the answers i got were check ,paw,fm,and speed pro or sealed power something like that

like i said local speed shop came up with nothing so i posted.

all bs asside i have never used search on the top ,didnt even know it was there,i have been using the search box at th ebottom

Chris Pacheco

Kinda wonder why you even bother sometimes eh?

I apologize for Chris for wasting everybodies time

 

[ALBERTAN]

Originally posted by WE287GN
all bs asside i have never used search on the top ,didnt even know it was there,i have been using the search box at th ebottom

Chris Pacheco

No BS buddy. ust trying to help you out. The Search feature on this board is quite powerful and extremely useful due to the activity here. You can search for most anything and find some really good threads on the subject. So much to learn...

 

[WE287GN]

got a few places to work with

First of all between these last two posts on "where do i get em"
like to thank all who supplied the places

got the cv place,pushrods, and one or two more to call up from the older post.hoping i would find them in a more popular vendor lbut guess being they are odd size from stock i will have to try the specialty places,crane or comp had em ,but kinda hoping to not have to drop 130 on em, 75 is a lot better already

again thanks to all for the info

Chris Pacheco

 

[Donald Smith]

What is the stock lenth of the pushrods? Thanks... Don

 

[WE287GN]

i think it is 8.680" does this sound right guys?

also confirmed at local gm dealer same length between the 84-87


Chris Pacheco